The simplicity starts with its design: a single button with a scrolling dial underneath an LED interface. That button is the only one on the entire machine. With it, you set the time, set the water temperature, set how many cups you want brewed, and when you want the brewing to start. It takes a second to get the hang of it, but we were impressed with how intuitive it is — a stark contrast to a machine like the Moccamaster KBT 10-Cup Coffee Brewer, which had so many extra pieces, it required constant consultation of the instruction manual.

The tall tower is fixed on a rectangular base, with a water tank that looks something akin to a trapezoid. The hard plastic funnel allows your favorite paper filters to fit inside of it. It is recommended that you use type 4 paper filters, however. You also have the option to use permanent gold filters if you want to move away from reoccurring costs.​
Feature-filled and powerful, the K475 Single-Serve K-Cup Pod Coffee Maker features customizable settings including strength and temperature control to deliver a truly premium brewing experience. Brew five different cup sizes – from 4 to 12 oz. with K-Cup(R) pods – plus the ability to brew a mug or carafe, the product brews a perfectly sized beverage for any occasion. Brewing your favorite beverage is easy thanks to the large color touchscreen, complete with separate settings for specialty...
The Hamilton Beach 12-Cup BrewStation coffee maker offers convenient one-hand dispensing without a conventional glass carafe. There's no pouring or spills, and nothing fragile to break and replace. No matter how much you try, it’s impossible to get freshly brewed flavor from coffee that’s been sitting on a hot plate too long. That’s why the Hamilton Beach BrewStation was created, the only coffeemaker that keeps coffee tasting fresh for up to four hours. This best-selling coffee maker...
All the machines we tested came with either insulated carafes or glass pots with built-in warmers. Both have pros and cons. Glass pots are typically easier to clean because they tend to have wider mouths, and the lack of internal insulation means that glass pots will have a greater interior volume relative to its exterior volume — basically, it’s easier to get your hand or dish sponge into a glass pot. On the other hand, glass pots are more fragile and have to be heated from a base plate. In our tests, those base plates could even raise the temperature of the coffee, like with the CuisinArt, which can make coffee taste burnt.
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.

Throughout the latter part of the 20th century, a number of inventors patented various coffeemaker designs using an automated form of the drip brew method. Subsequent designs have featured changes in heating elements, spray head, and brew-basket design, as well as the addition of timers and clocks for automatic-start, water filtration, filter and carafe design, and even built-in coffee grinding mechanisms.


‡Pre-Infusing: Pre-infusing is a technique where the dry coffee grounds are initially saturated with hot water, allowing a “bloom” of carbon dioxide to escape. This 45-second(ish) process puts hot water into contact with more surface area around each ground throughout the brewing process, as it’s no longer competing with the escaping gas bubbles. It can improve the quality of the final product, since this more uniform contact creates a more even extraction. It’s a feature that six of the 10 pots we tested incorporated into their designs — as well as all four of our top picks.

‡Pre-Infusing: Pre-infusing is a technique where the dry coffee grounds are initially saturated with hot water, allowing a “bloom” of carbon dioxide to escape. This 45-second(ish) process puts hot water into contact with more surface area around each ground throughout the brewing process, as it’s no longer competing with the escaping gas bubbles. It can improve the quality of the final product, since this more uniform contact creates a more even extraction. It’s a feature that six of the 10 pots we tested incorporated into their designs — as well as all four of our top picks.
An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
We’re the largest online retailer of espresso machines and it’s no secret why. We love coffee. We love that first sip in the morning, the one that you’ve got to fight to get to your mouth because 8 hours of sleep seems like a pipe dream. We love that rush, when the caffeine kicks in and you know that you’ve got the day in the palm of your hand. We love the art – brewing, roasting, tasting – and the journey that each coffee drinker takes in search of their perfect joe. We’ve been sharing that love with the world since 1997 and we hope you’ll pull up a cup and join us! If this sounds like the place you would love to work, see our latest job openings on our Careers Page!

6 month warranty for Spinn Original, Original Plus, and Original pro. If your machine is defective (DOA) when you receive it, we’ll make it right immediately. For US customers, if it develops a problem later that’s our fault, we’ll either (at our option) ship you the parts that need to be replaced along with detailed instructions, or ship it back to us for repair or replacement – in either case, for free, including shipping. For international customers, parts and repairs are free, but shipping is not included. The warranty covers everything except water filters. Unfortunately, if you modify your firmware, we can’t cover your Spinn under warranty (because it’s easy to break your Spinn by modifying your firmware!)


The Hamilton Beach 12-Cup BrewStation coffee maker offers convenient one-hand dispensing without a conventional glass carafe. There's no pouring or spills, and nothing fragile to break and replace. No matter how much you try, it’s impossible to get freshly brewed flavor from coffee that’s been sitting on a hot plate too long. That’s why the Hamilton Beach BrewStation was created, the only coffeemaker that keeps coffee tasting fresh for up to four hours. This best-selling coffee maker...

“This little coffee maker is PERFECT! So easy and reliable. It works great for a household with little kitchen space and light coffee drinkers. It has upped my coffee intake because it’s so easy to make coffee now! Plus, to be able to have it waiting in the morning and encourage me to actually get out of bed on time is well worth the price of this little machine.”
CR’s take: Our highest-rated drip brewer with an insulated, thermal carafe, the Ninja Bar Brewer CF085 has plenty to recommend it. CR’s testers find that it offers superb brew performance and is very easy to use. In our member surveys, Ninja drip coffee makers received an Excellent rating for owner satisfaction. (We don’t yet have enough data to judge reliability.) This model has a full suite of features, including an unusual over-ice brew mode for making iced coffee. Ninja claims its thermal carafe will keep coffee hot for 2 hours, and the machine comes with a milk frother and a standalone French-press brewer. These features come at a price, of course; the Ninja Bar Brewer is the second most expensive model on this list.
×