“I purchased the machine for myself as a birthday present, and I’ve had it for about six weeks. We have a Pavoni espresso machine, which my husband loves for his espressos, but I think it’s a pain for making lattes: grinding the beans, tamping down the pod, ‘pulling’ the lever (which will be really hard if you tamp it too densely), steaming the milk, and then cleaning the steaming wand, not to mention what a pain it is to refill the water chamber (turn off, wait till pressure is gone, then you can refill). Why am I listing all of these steps? Because that’s what you don’t have to worry about with the Lattissima! Here are my steps now: Turn on the machine, get the milk container out of the fridge and plug it into the front, put an espresso capsule in the top, stick a mug under the spout, and push the Latte button. Done. You do need to clean the frother, which is just putting another cup under the spout, turn the milk to “clean” and let it clean, then you can remove the milk container and stick it in the fridge. I clean the milk container once a week, soaking all the pieces in a bowl of hot, soapy water for a few hours.”
An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
Inspired by professional machines, this high-end coffee and espresso maker is designed to be simple to use. It has an intuitive touchscreen and a sleek design with an aluminum finish that will look good on display in your kitchen. All it takes is the touch of a button to produce cappuccino or latte comparable to your favorite coffee shop, or you can produce warm milk froth or hot water for your hot chocolate or other drinks.
Create your perfect beverages, from espresso to cappuccino or ristretto, with the KRUPS Fully automatic 2-in-1 touch cappuccino. With its integrated burr grinder, enjoy a wide range of gourmet drinks from ristretto to long coffee to espresso, all at the touch of a button. You just have to place your fresh beans in the bean container on top and select the drink you would like to enjoy from the large menu displayed on the intuitive color touch-screen. You can also adjust the strength of your...
It can take a little while to get to know the ins and outs of a new coffee maker. In CR’s labs, each drip coffee maker we test brews roughly 65 cups by the time our engineers are through with it. And brewing is just one of many aspects we look at. We test for handling and convenience, too, so you can choose a model that helps you sail through morning madness. 
×