“Last night was a perfect test of the single-cup concept. I had already programmed and prepped my 3 a.m. standard coffee brew, however, I still wanted a cup of coffee. I switched over to the single cup and brewed my cup, then switched back and pressed the program button to ensure it would still brew the main pot at 3 a.m. Worked like a charm!! Before, I would have had to brew the entire eight cups that were ready, toss out most of it, and set up my morning brew all over again.”
If your busy life keeps you from making coffee by hand, you can also consider a capsule machine such as a Nespresso coffee maker. These machines use small capsules or pods of coffee, so you don’t have to worry about measuring grounds and adding them to your device. Simply add a capsule, fill up the reservoir and press the On button. If you’re more of a traditionalist, a stovetop espresso maker might be the right option for you. This type of maker uses your stove to heat up water, which then steams up and passes through a capsule of grounds above the reservoir. The steamy espresso then collects in an upper reservoir at the top of the maker. These espresso makers are very popular in Europe and require no electricity to function.
The method for making coffee in a percolator had barely changed since its introduction in the early part of the 20th century. However, in 1970 General Foods Corporation introduced Max Pax, the first commercially available "ground coffee filter rings". The Max Pax filters were named so as to compliment General Foods' Maxwell House coffee brand. The Max Pax coffee filter rings were designed for use in percolators, and each ring contained a pre-measured amount of coffee grounds that were sealed in a self-contained paper filter. The sealed rings resembled the shape of a doughnut, and the small hole in the middle of the ring enabled the coffee filter ring to be placed in the metal percolator basket around the protruding convection (percolator) tube.
The Mr. Coffee DRX5 coffee maker gives you the advanced action to delay-brew your coffee, enabling you to wake up to coffee waiting for you. The auto pause and grab a cup option allows you to get a cup of coffee before the brew cycle is finished, with the machine halting the brewing process so you can pour a cup and then complete the process once you reinsert the carafe into the chassis.
Carafe style. Heavy coffee drinkers should look for a model with a thermal carafe. These coffee machines can keep your coffee warm for hours without having to sit on a burner, which can scald the liquid. Glass pots are not insulated and must sit on a heated burner to keep the coffee warm, so they’re an ideal choice for those who need only one or two cups a day. Some coffee drinkers insist that a glass carafe results in a better-tasting cup of joe.
The next is the machine’s auto-pause. If you remove the carafe before your full pot is done brewing, the flow will stop until the carafe goes back in. It’s not a perfect system. There are a few inevitable drips that add an extra step to clean-up, and if the water is held up in the brew basket for too long, it increases the chance of over-extraction. But if you want a great first cup to sip on while the rest of your pot is brewing, you’ll get it in a much more satisfying time frame.
You can check out our best milk frothers here. Some of you will stick with the machine's frothing wand, but you'll still need a milk frothing pitcher, so we recommend this one from Rattleware. Should you want a better tamper, we recommend this one from Rattleware. To save money on the coffee grinder, you can try this manual Hario Skerton Ceramic Coffee Mill, but if you want a high-end one, you may pay more than $200 for it.
It can take a little while to get to know the ins and outs of a new coffee maker. In CR’s labs, each drip coffee maker we test brews roughly 65 cups by the time our engineers are through with it. And brewing is just one of many aspects we look at. We test for handling and convenience, too, so you can choose a model that helps you sail through morning madness.