CR’s take: For $80, this Mr. Coffee 12-cup drip brewer is surprisingly stylish. Its airy design sets it apart from the blocky shapes common to the category. This model earns a rating of Very Good in CR’s brew-performance tests and makes a full pot in just 9 minutes. It offers brew-strength control, programming, and a permanent coffee filter. With its performance and striking appearance, you might not mind having it out on the counter—especially in a kitchen with a stainless fridge and range.
If you push the 54mm stainless steel portafilter into the hands-free grinding cradle, the grounds will go right into the filter. The grinder shuts off when it's done, too, so you don't have to worry about figuring out if you've got the right amount. Finally, the included 54mm tamper ensures that your grounds are evenly pressed, so you get the most out of your beans.
CR’s take: Like the model above, the Cuisinart Burr Grind & Brew takes whole coffee beans and grinds them fresh for each pot. It features programming, brew-strength control, a water filter, a permanent coffee filter, and auto-shutoff. This model earns a great rating for carafe handling. The stainless steel finish and glass carafe certainly elevate the experience of using it. Cuisinart brewers also received an Excellent rating for owner satisfaction. But the performance and finish come at a premium—this machine costs significantly more than the Black+Decker Mill & Brew.
The moka pot is most commonly used in Europe and in Latin America. It has become an iconic design, displayed in modern industrial art and design museums such as the Wolfsonian- FIU, Museum of Modern Art, the Cooper–Hewitt, National Design Museum, the Design Museum, and the London Science Museum. Moka pots come in different sizes, from one to eighteen 50 ml cups. The original design and many current models are made from aluminium with bakelite handles.
A cafetiere (Coffee Plunger, French press in US English) requires coffee of a coarser grind than does a drip brew coffee filter, as finer grounds will seep through the press filter and into the coffee. Coffee is brewed by placing the coffee and water together, stirring it and leaving to brew for a few minutes, then pressing the plunger to trap the coffee grounds at the bottom of the beaker.
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.