An early variant technique, called a balance siphon, was to have the two chambers arranged side-by-side on a sort of scale-like device, with a counterweight attached opposite the initial (or heating) chamber. Once the near-boiling water was forced from the heating chamber into the brewing one, the counterweight was activated, causing a spring-loaded snuffer to come down over the flame, thus turning "off" the heat, and allowing the cooled water to return to the original chamber. In this way, a sort of primitive 'automatic' brewing method was achieved.

The well-designed Braun BrewSense came closer to the gold standard for water brewing temperature than almost any other drip coffee maker in our testing, and delivered a rich, bold and hot cup of coffee. It has settings to program the coffee to brew ahead of time and you can adjust the brew strength and the temperature of the warming plate. Also available in black.

“This little coffee maker is PERFECT! So easy and reliable. It works great for a household with little kitchen space and light coffee drinkers. It has upped my coffee intake because it’s so easy to make coffee now! Plus, to be able to have it waiting in the morning and encourage me to actually get out of bed on time is well worth the price of this little machine.”

The impact of science and technological advances as a motif in post-war design was eventually felt in the manufacture and marketing of coffee and coffee-makers. Consumer guides emphasized the ability of the device to meet standards of temperature and brewing time, and the ratio of soluble elements between brew and grounds. The industrial chemist Peter Schlumbohm expressed the scientific motif most purely in his "Chemex" coffeemaker, which from its initial marketing in the early 1940s used the authority of science as a sales tool, describing the product as "the Chemist's way of making coffee", and discussing at length the quality of its product in the language of the laboratory: "the funnel of the CHEMEX creates ideal hydrostatic conditions for the unique... Chemex extraction." Schlumbohm's unique brewer, a single Pyrex vessel shaped to hold a proprietary filter cone, resembled nothing more than a piece of laboratory equipment, and surprisingly became popular for a time in the otherwise heavily automated, technology-obsessed 1950s household.
Pierce's design was later improved by U.S. appliance engineers Ivar Jepson, Ludvik Koci, and Eric Bylund of Sunbeam in the late 1930s. They altered the heating chamber and eliminated the recessed well which was hard to clean. They also made several improvements to the filtering mechanism. Their improved design of plated metals, styled by industrial designer Alfonso Iannelli, became the famous Sunbeam Coffeemaster line of automated vacuum coffee makers (Models C-20, C-30, C40, and C-50). The Coffeemaster vacuum brewer was sold in large numbers in the United States during the years immediately following World War I.
“Last night was a perfect test of the single-cup concept. I had already programmed and prepped my 3 a.m. standard coffee brew, however, I still wanted a cup of coffee. I switched over to the single cup and brewed my cup, then switched back and pressed the program button to ensure it would still brew the main pot at 3 a.m. Worked like a charm!! Before, I would have had to brew the entire eight cups that were ready, toss out most of it, and set up my morning brew all over again.”
All the machines we tested came with either insulated carafes or glass pots with built-in warmers. Both have pros and cons. Glass pots are typically easier to clean because they tend to have wider mouths, and the lack of internal insulation means that glass pots will have a greater interior volume relative to its exterior volume — basically, it’s easier to get your hand or dish sponge into a glass pot. On the other hand, glass pots are more fragile and have to be heated from a base plate. In our tests, those base plates could even raise the temperature of the coffee, like with the CuisinArt, which can make coffee taste burnt.

The principle of a vacuum brewer was to heat water in a lower vessel until expansion forced the contents through a narrow tube into an upper vessel containing ground coffee. When the lower vessel was empty and sufficient brewing time had elapsed, the heat was removed and the resulting vacuum would draw the brewed coffee back through a strainer into the lower chamber, from which it could be decanted. The Bauhaus interpretation of this device can be seen in Gerhard Marcks' Sintrax coffee maker of 1925.


A new French press is an ideal companion on a camping trip or picnic. Our sturdy versions of French presses are available in glass, metal, ceramic and other materials. Invest in your own efficient single-cup brewers with included cups and thermal mugs to create on-the-go coffee drinks for one person. Cold-brew machines and kits are other terrific options when you prefer chilled and iced coffee beverages. Remember to order plenty of filters, tampers, descaling tabs and other coffee accessories to keep your machine fresh and bright. Clean machines with the right size filters brew the best coffee
×