*When you buy a machine with coffee credits you will receive a code with credits to buy coffee from curated roasters in the Spinn app. The credits will be uploaded in your account settings of the app. The credits allow for easy browsing and discovery of local and national coffee roasters. The credits will be used for automatically ordering when your Spinn machine is running low.

An early variant technique, called a balance siphon, was to have the two chambers arranged side-by-side on a sort of scale-like device, with a counterweight attached opposite the initial (or heating) chamber. Once the near-boiling water was forced from the heating chamber into the brewing one, the counterweight was activated, causing a spring-loaded snuffer to come down over the flame, thus turning "off" the heat, and allowing the cooled water to return to the original chamber. In this way, a sort of primitive 'automatic' brewing method was achieved.


An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.

For all the coffee drinkers and aficionados who despise the long café lines, dread the overwhelming coffee options or need a fix for those early morning caffeine pains – fear no more! There’s finally an affordable, low-maintenance coffeemaker that can brew basic or premium-roast coffee in a fraction of the cost as the coffeehouse: The Two-Way Brewer. With stainless steel durability and twice the brewing options as other leading coffeemakers, the Two-Way Brewer doubles as a compact...
Our brew-performance tests measure the brew temperature and contact time (how long water stays within a sweet spot of 195° to 205° F for brewing). We measure concentration using a refractometer, a device that measures the amount of coffee dissolved in each brew. Our convenience tests look at how easy it is to set timers, fill the reservoir, clean the machine, and more. And for the first time, we’re incorporating predicted reliability and owner satisfaction ratings into the new Overall Score for each model. We determine these ratings for each drip coffee maker brand using survey data collected from thousands of CR members.
×