It also automatically pre-infuses the coffee, allowing the grounds to vent their CO2 and “bloom.” Remember, only half of the machines we tested had this feature, and it proved to pay off in our taste tests. The four machines we recommend all pre-infuse. Only one coffee maker without it, the Hamilton Beach, performed well at all in our taste tests — but that guy was so cheap and flimsy, part of the brew basket broke during our testing. Sorry, Hamilton Beach.

That said, it’s not as elegant to use as the OXO machines. (Nor is it as nice to look at. One tester described its tall, bulbous body and squat carafe as “UFO-like.”) Take its eight-button controls, for example, which you use to toggle among brew modes, scroll up and down within the menu, and engage a manual brewing feature. Programming it to start brewing at a certain time was about as intuitive as setting an alarm on a clock radio — easy enough, but more technical than sleek. OXO definitely feels like the future; Behmor is more, “If it ain’t broke, why fix it?”


Create your perfect beverages, from espresso to cappuccino or ristretto, with the KRUPS Fully automatic 2-in-1 touch cappuccino. With its integrated burr grinder, enjoy a wide range of gourmet drinks from ristretto to long coffee to espresso, all at the touch of a button. You just have to place your fresh beans in the bean container on top and select the drink you would like to enjoy from the large menu displayed on the intuitive color touch-screen. You can also adjust the strength of your...
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.
The moka pot is most commonly used in Europe and in Latin America. It has become an iconic design, displayed in modern industrial art and design museums such as the Wolfsonian- FIU, Museum of Modern Art, the Cooper–Hewitt, National Design Museum, the Design Museum, and the London Science Museum. Moka pots come in different sizes, from one to eighteen 50 ml cups. The original design and many current models are made from aluminium with bakelite handles.
An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.
Inspired by professional machines, this high-end coffee and espresso maker is designed to be simple to use. It has an intuitive touchscreen and a sleek design with an aluminum finish that will look good on display in your kitchen. All it takes is the touch of a button to produce cappuccino or latte comparable to your favorite coffee shop, or you can produce warm milk froth or hot water for your hot chocolate or other drinks.
“This is the same coffee maker that I bought years ago. And it’s even the same price. Yep — they do still make things like they used to. And they last forever. It’s super simple, super reliable, compact, and cheap. There are a lot of places where we can spend money, but a simple cup of coffee doesn’t have to be one of them. Once you get the amount of water and coffee figured out to your taste — simply do that. No K-cup, nothing to recycle, fits the car cup holder. And the coffee stays hot in the mug.”
Try a new way to brew coffee if you’re tired of the same-old, same-old. We offer a variety of ways to brew up tasty hot beverages to fill your favorite coffee cup. Choose from standard drip machines with high volume carafes or durable thermal carafes. Pour-over brewers come in manual and automatic versions to create fast, hot cups of java goodness. Automatic versions heat water to industry standards in mere seconds and allow plenty of contact between hot water and beans to develop the coffee essences you love. Manual pour-over brewers have everything you need but the hot water to make your own coffee wherever you are. Order a teapot or automatic kettle to make quick cups of coffee without waiting for a machine to brew it for you. Go retro with a siphon-style coffee maker. You never have to use the stove for the electric versions of siphon brewers. A flip of a switch starts the process. Hot water vapor pushes through the top of the appliance to soak the ground coffee beans, and then the brew slowly drips back down into the carafe for a perfect cup of coffee.
×