An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.

The method for making coffee in a percolator had barely changed since its introduction in the early part of the 20th century. However, in 1970 General Foods Corporation introduced Max Pax, the first commercially available "ground coffee filter rings". The Max Pax filters were named so as to compliment General Foods' Maxwell House coffee brand. The Max Pax coffee filter rings were designed for use in percolators, and each ring contained a pre-measured amount of coffee grounds that were sealed in a self-contained paper filter. The sealed rings resembled the shape of a doughnut, and the small hole in the middle of the ring enabled the coffee filter ring to be placed in the metal percolator basket around the protruding convection (percolator) tube.
We’re the largest online retailer of espresso machines and it’s no secret why. We love coffee. We love that first sip in the morning, the one that you’ve got to fight to get to your mouth because 8 hours of sleep seems like a pipe dream. We love that rush, when the caffeine kicks in and you know that you’ve got the day in the palm of your hand. We love the art – brewing, roasting, tasting – and the journey that each coffee drinker takes in search of their perfect joe. We’ve been sharing that love with the world since 1997 and we hope you’ll pull up a cup and join us in celebration of nature’s most perfect beverage, coffee!
This K-Elite Single-Serve K-Cup Pod Coffee Maker blend premium finish and programmable features together to deliver both modern design and the ultimate in beverage customization. It’s a stylish addition to any kitchen. Features strong brew setting when you want to brew a bolder cup of coffee, and an ice setting to brew hot over ice for a refreshing, full-flavored ice coffee.
CR’s take: If you like the look of black stainless steel, you can add a hit of the trendy finish to your kitchen with the Bella Ultimate Elite Collection coffee maker. Appearance aside, this model brews a fresh pot in just 9 minutes and is graceful in action, earning strong ratings in our carafe handling tests. It offers programming, brew-strength control, a pause-and-serve feature, and auto-shutoff. Bella drip machines also received a Very Good rating for predicted reliability. At about $50, this affordable, attractive option won’t disappoint.
×