Prior to the introduction of pre-measured self-contained ground coffee filter rings, fresh coffee grounds were measured out in scoopfuls and placed into the metal percolator basket. This process enabled small amounts of coffee grounds to leak into the fresh coffee. Additionally, the process left wet grounds in the percolator basket, which were very tedious to clean. The benefit of the Max Pax coffee filter rings was two-fold: First, because the amount of coffee contained in the rings was pre-measured, it negated the need to measure each scoop and then place it in the metal percolator basket. Second, the filter paper was strong enough to hold all the coffee grounds within the sealed paper. After use, the coffee filter ring could be easily removed from the basket and discarded. This saved the consumer from the tedious task of cleaning out the remaining wet coffee grounds from the percolator basket.
This testing was designed to highlight the difference in how each machine extracted its coffee grounds. Remember, extraction is tied to water temperature, how long the grounds had to steep, and how evenly that water is distributed in the brew basket. (Depending on how the machine distributes the water and the shape of the basket, any particular ground may or may not receive the same amount of time in contact with water — thus any individual grind may be over-extracted, under-extracted, or just right.) Properly extracted grounds would have a balance of notes and aromas, from slight hints of acid to a pleasant amount of bitterness.
Drip-style coffee makers already have a bit of a flavor handicap when compared with other brewing methods, like pour-over and French press, which give coffee drinkers ultimate control over every aspect of the brewing (and therefore extraction) process. This makes it even more important to select a high-quality coffee bean for your at-home drip coffee maker. To learn more, we spoke with Saadat Awan at Woodcat Coffee in Los Angeles.
The Bunn 13300.0013 VP17-3BLK3L Pourover commercial Coffee Brewer The Bunn 13300.0013 VP17-3BLK3L Pourover commercial Coffee Brewer with Three Lower Warmers in Black is perfect for convenience stores family restaurants cafes or diners. Totally portable it can be used anywhere there's a plug. Just pour cold water in the top and coffee brews immediately up to 3.8 gal. per ... More + Product Details Close
This K-Elite Single-Serve K-Cup Pod Coffee Maker blend premium finish and programmable features together to deliver both modern design and the ultimate in beverage customization. It’s a stylish addition to any kitchen. Features strong brew setting when you want to brew a bolder cup of coffee, and an ice setting to brew hot over ice for a refreshing, full-flavored ice coffee.
That water is heated in a detachable reservoir that doubles as a kettle. This is a unique feature for a coffee maker, but one we ended up appreciating, especially for households with a mix of tea lovers and instant-oatmeal eaters alongside coffee drinkers. Fill the kettle up, lock it in place, and scroll the dial to the amount of coffee you want brewed. The machine is designed so that, even if you have more water in the kettle than you need, it will brew only the amount you specify. The one thing you actually have to measure with the OXO On 12-Cup is the grounds. Do that right, and it’s pretty much impossible to screw it up.
“Last night was a perfect test of the single-cup concept. I had already programmed and prepped my 3 a.m. standard coffee brew, however, I still wanted a cup of coffee. I switched over to the single cup and brewed my cup, then switched back and pressed the program button to ensure it would still brew the main pot at 3 a.m. Worked like a charm!! Before, I would have had to brew the entire eight cups that were ready, toss out most of it, and set up my morning brew all over again.”
All the machines we tested came with either insulated carafes or glass pots with built-in warmers. Both have pros and cons. Glass pots are typically easier to clean because they tend to have wider mouths, and the lack of internal insulation means that glass pots will have a greater interior volume relative to its exterior volume — basically, it’s easier to get your hand or dish sponge into a glass pot. On the other hand, glass pots are more fragile and have to be heated from a base plate. In our tests, those base plates could even raise the temperature of the coffee, like with the CuisinArt, which can make coffee taste burnt.
The machine has advanced technology for making the best milk froth for indulgent flavor, and the froth texture can be adjusted with the twist of a knob, so it’s exactly the way you like it. Cleaning is easy — turn the milk knob to the “clean” position to automatically rinse the milk system. A descaling system alerts you when it’s time to clean, and the pluggable descaling pipe makes the process easy.
The Mr. Coffee Optimal Brew coffee maker System has a highly modular design, with its rectangular water reservoir easily sliding in and out of the chassis. For those who only want a cup of basic coffee, you will find that the Mr. Coffee Optimal Brew coffee maker System will do that very well – its "brew now" button is found on the front of the machine.
For hundreds of years, making a cup of coffee was a simple process. Roasted and ground coffee beans were placed in a pot or pan, to which hot water was added, followed by attachment of a lid to commence the infusion process. Pots were designed specifically for brewing coffee, all with the purpose of trying to trap the coffee grounds before the coffee is poured. Typical designs feature a pot with a flat expanded bottom to catch sinking grounds and a sharp pour spout that traps the floating grinds. Other designs feature a wide bulge in the middle of the pot to catch grounds when coffee is poured.
“This is the same coffee maker that I bought years ago. And it’s even the same price. Yep — they do still make things like they used to. And they last forever. It’s super simple, super reliable, compact, and cheap. There are a lot of places where we can spend money, but a simple cup of coffee doesn’t have to be one of them. Once you get the amount of water and coffee figured out to your taste — simply do that. No K-cup, nothing to recycle, fits the car cup holder. And the coffee stays hot in the mug.”