The Mr. Coffee brand of coffee makers is a straightforward machine that is affordable. If you want something with more power that will consistently make a fantastic cup of coffee, consider the Zojirushi coffee maker with four warming plate settings that will let you make iced as well as hot coffee. Not only that, but it's a coffee maker that makes a statement on your counter.
The machine has advanced technology for making the best milk froth for indulgent flavor, and the froth texture can be adjusted with the twist of a knob, so it’s exactly the way you like it. Cleaning is easy — turn the milk knob to the “clean” position to automatically rinse the milk system. A descaling system alerts you when it’s time to clean, and the pluggable descaling pipe makes the process easy.
Once you start brewing, it makes a really, really good pot of coffee. Our taste test revealed the OXO On 12-Cup coffee was “dark and strong” and appealed to the more traditionalist coffee palates. The great flavor comes from the brewing process. The OXO machines have wide shower heads with multiple ports through which water streams, dispersing it evenly throughout the brew basket. Lots of other coffee makers spout water through just one hole, or through shower heads with a smaller radius, which can increase the chances of uneven extraction.
It’s obvious, but easy to forget: If you don’t clean out your coffee machine’s carafe after each use with soap and water, you’ll always end up tasting a little bit of yesterday’s now-bitter brew. Thermal carafes need to be hand-washed, but all the plastic components of our top picks — brew baskets, lids, etc. — are dishwasher-safe if you keep them on the top rack.
An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
The well-designed Braun BrewSense came closer to the gold standard for water brewing temperature than almost any other drip coffee maker in our testing, and delivered a rich, bold and hot cup of coffee. It has settings to program the coffee to brew ahead of time and you can adjust the brew strength and the temperature of the warming plate. Also available in black.
The OXO is SCAA-certified, so we knew going in that it would heat water to the right temperature range and let coffee brew for the right amount of time. But what really sold us on the OXO was how its scrolling dial made even that customizable. Assuming you want to bring the extraction down a touch for lighter, subtler coffee, you can lower the water temperature with a twist of the dial. Likewise, if you want a slightly more robust aroma from your brew, you can increase the water’s temp the same way.
Our brew-performance tests measure the brew temperature and contact time (how long water stays within a sweet spot of 195° to 205° F for brewing). We measure concentration using a refractometer, a device that measures the amount of coffee dissolved in each brew. Our convenience tests look at how easy it is to set timers, fill the reservoir, clean the machine, and more. And for the first time, we’re incorporating predicted reliability and owner satisfaction ratings into the new Overall Score for each model. We determine these ratings for each drip coffee maker brand using survey data collected from thousands of CR members.
×