*When you buy a machine with coffee credits you will receive a code with credits to buy coffee from curated roasters in the Spinn app. The credits will be uploaded in your account settings of the app. The credits allow for easy browsing and discovery of local and national coffee roasters. The credits will be used for automatically ordering when your Spinn machine is running low.
Our brew-performance tests measure the brew temperature and contact time (how long water stays within a sweet spot of 195° to 205° F for brewing). We measure concentration using a refractometer, a device that measures the amount of coffee dissolved in each brew. Our convenience tests look at how easy it is to set timers, fill the reservoir, clean the machine, and more. And for the first time, we’re incorporating predicted reliability and owner satisfaction ratings into the new Overall Score for each model. We determine these ratings for each drip coffee maker brand using survey data collected from thousands of CR members.
“I purchased the machine for myself as a birthday present, and I’ve had it for about six weeks. We have a Pavoni espresso machine, which my husband loves for his espressos, but I think it’s a pain for making lattes: grinding the beans, tamping down the pod, ‘pulling’ the lever (which will be really hard if you tamp it too densely), steaming the milk, and then cleaning the steaming wand, not to mention what a pain it is to refill the water chamber (turn off, wait till pressure is gone, then you can refill). Why am I listing all of these steps? Because that’s what you don’t have to worry about with the Lattissima! Here are my steps now: Turn on the machine, get the milk container out of the fridge and plug it into the front, put an espresso capsule in the top, stick a mug under the spout, and push the Latte button. Done. You do need to clean the frother, which is just putting another cup under the spout, turn the milk to “clean” and let it clean, then you can remove the milk container and stick it in the fridge. I clean the milk container once a week, soaking all the pieces in a bowl of hot, soapy water for a few hours.”

The Moccamaster isn't for everyone. Handmade in the Netherlands, it costs around $300—and would never win an award for value. It lacks a programmable timer, and it was also bit more difficult to set up than the rest of the coffee makers—in fact most were ready to go right out of the box. But a quick look at the instruction diagram should clear up any confusion, and the end result is well worth the effort.
Our top pick is the OXO On 12-Cup Coffee Brewing System. It’s a large machine – both in footprint and in capacity — but it earned the second-highest scores in our taste test, and is sleek both to look at and to operate. Convenient features like programmable auto-brewing, a removable water reservoir that doubles as a kettle, and a spigot that stops the brew mid-stream if you remove the carafe make this machine feel high tech without being high maintenance. For those who want to be a little more hands-on with the brewing process, its single-button dial also lets you adjust the water’s brewing temperature, giving you more access to experiment with extraction and flavor.

So while yes, $150 (current price as I review this item) is a good chunk of change, I honestly believe it’s worth it. This is a high-quality machine that will hopefully last a very, very long time. The quality of the espresso is very good, and in the long run, it will save you the cost of espresso-based drinks at the coffee shop. It all evens out in the end! If you are considering buying this, my advice is to just do it. It’s worth it! Love love love!”
So while yes, $150 (current price as I review this item) is a good chunk of change, I honestly believe it’s worth it. This is a high-quality machine that will hopefully last a very, very long time. The quality of the espresso is very good, and in the long run, it will save you the cost of espresso-based drinks at the coffee shop. It all evens out in the end! If you are considering buying this, my advice is to just do it. It’s worth it! Love love love!”
It also automatically pre-infuses the coffee, allowing the grounds to vent their CO2 and “bloom.” Remember, only half of the machines we tested had this feature, and it proved to pay off in our taste tests. The four machines we recommend all pre-infuse. Only one coffee maker without it, the Hamilton Beach, performed well at all in our taste tests — but that guy was so cheap and flimsy, part of the brew basket broke during our testing. Sorry, Hamilton Beach.

The single-serve or single-cup coffeemaker has gained popularity in recent years.[5] Single-serve brewing systems let a certain amount of water heated at a precise temperature go through a coffee portion pack (or coffee pod), brewing a standardized cup of coffee into a recipient placed under the beverage outlet. A coffee portion pack has an air-tight seal to ensure product freshness. It contains a determined quantity of ground coffee and usually encloses an internal filter paper for optimal brewing results. The single-serve coffeemaker technology often allows the choice of cup size and brew strength, and delivers a cup of brewed coffee rapidly, usually at the touch of a button. Today, a variety of beverages are available for brewing with single-cup machines such as tea, hot chocolate and milk-based specialty beverages. Single-cup coffee machines are designed for both home and commercial use.
“I LOVE my Breville. I am a career barista. I have had this machine for almost a year now and waited to write a review until now so I wasn’t blinded by the initial excitement of purchasing a home espresso machine. I love to buy more expensive coffee from third-wave roasters, and this machine is so easy to dial in, I come away with professional shots almost every time. While this may be due to my experience in the shop, I will say that my husband is not a barista and picked up dialing in pretty fast using the Breville guides [that were] included. My only complaint is that the steaming wand is not the best. It takes a couple tries starting it up to get it going full blast some mornings, but I have always been able to achieve latte art. That is a very small complaint considering this machine is half the price of its competitors but still can create some awesome coffee. I’d highly recommend it for baristas on a budget.”
You can check out our best milk frothers here. Some of you will stick with the machine's frothing wand, but you'll still need a milk frothing pitcher, so we recommend this one from Rattleware. Should you want a better tamper, we recommend this one from Rattleware. To save money on the coffee grinder, you can try this manual Hario Skerton Ceramic Coffee Mill, but if you want a high-end one, you may pay more than $200 for it.

The simplicity starts with its design: a single button with a scrolling dial underneath an LED interface. That button is the only one on the entire machine. With it, you set the time, set the water temperature, set how many cups you want brewed, and when you want the brewing to start. It takes a second to get the hang of it, but we were impressed with how intuitive it is — a stark contrast to a machine like the Moccamaster KBT 10-Cup Coffee Brewer, which had so many extra pieces, it required constant consultation of the instruction manual.


Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.

“This is simply an amazing machine. I have had NO trouble with it whatsoever. … The quality of the espresso is better than what I get out of the coffee shops — using their beans. It took me a long time to tune in the perfect cup of espresso/latte/cappuccino, and there are variables, but mostly in the beans you buy. I had to buy a decent burr grinder, but considering the investment in the machine, another $150 for a good burr grinder is nothing. I only run filtered water through the machine. I love this machine. I have poured over 2,500 shots through it. Not a single problem with the machine. Many mistakes by the operator, but I will take my espresso out of this machine before any store bought cup-o-Joe.”


For example, if your coffee tastes a bit salty or sour, the grounds are under-extracted, which can be remedied by a finer grind. But what if only some of your grounds are too coarse, and others are too fine – and maybe some are just right? Having uniform grind size throughout your brew basket makes it easier to isolate and adjust this variable in order to get the level of extraction you want. The only way to achieve that is with a burr grinder. Miller — as well as a handful of our other experts — recommends the Barazata Encore Coffee Grinder ($129).
At the beginning of the twentieth century, although some coffee makers tended to uniformity of design (particularly stovetop percolators), others displayed a wide variety of styling differences. In particular, the vacuum brewer, which required two fully separate chambers joined in an hourglass configuration, seemed to inspire industrial designers. Interest in new designs for the vacuum brewer revived during the American Arts & Crafts movement with the introduction of "Silex" brand coffee makers, based on models developed by Massachusetts housewives Ann Bridges and Mrs. Sutton. Their use of Pyrex solved the problem of fragility and breakability that had made this type of machine commercially unattractive. During the 1930s, simple, clean forms, increasingly of metal, attracted positive attention from industrial designers heavily influenced by the functionalist imperative of the Bauhaus and Streamline movements. It was at this time that Sunbeam's sleek Coffeemaster vacuum brewer appeared, styled by the famous industrial designer Alfonso Iannelli. The popularity of glass and Pyrex globes temporarily revived during the Second World War, since aluminum, chrome, and other metals used in traditional coffee makers became restricted in availability.
The dishwasher-safe, BPA free model from Takeya can brew up to a quart of concentrated cold brew coffee. It not only yielded one of the best tasting brews, it also aced our usability tests. The brewer is easy to set up, offers a durable build, and is simple to clean and store for later use. It is also the only brewer that is air-tight while it brews, allowing you to easily store the brewer on its side in a packed fridge.

“Last night was a perfect test of the single-cup concept. I had already programmed and prepped my 3 a.m. standard coffee brew, however, I still wanted a cup of coffee. I switched over to the single cup and brewed my cup, then switched back and pressed the program button to ensure it would still brew the main pot at 3 a.m. Worked like a charm!! Before, I would have had to brew the entire eight cups that were ready, toss out most of it, and set up my morning brew all over again.”
The Brazil French Press coffee maker, designed in the early 80's, was Bodum's first coffee maker and quickly became a symbol of what Bodum stands for. Attractive and functional design at an affordable price! The Brazil has a heat resistant, borosilicate glass beaker (the standard for all Bodum French press plungers) and a polypropylene handle and base, which make the Brazil easy to use and easy to clean. The domed lid is made of a smooth polypropylene and has the special Bodum safety and aroma...
ECM Espresso Coffee Machines Manufacture produces premium espresso machines for household and gastronomy as well as espresso grinders. We have over 20 years of experience in the espresso business and manufacture our products with heart and passionate handwork. Our goal is your perfect espresso. Our product range is rounded off by a wide range of espresso accessories.
I was throwing down $4 on each cup, five times a week — that's over $1,000 a year. A few years ago, a friend from Austria — they really know coffee over there — introduced me to a single-serve coffee maker that could produce a super high-quality cup of coffee in less than one minute. I was dubious when he handed me the drink at his home, but I took a sip and was blown away by how good it tasted.

CR’s take: For $80, this Mr. Coffee 12-cup drip brewer is surprisingly stylish. Its airy design sets it apart from the blocky shapes common to the category. This model earns a rating of Very Good in CR’s brew-performance tests and makes a full pot in just 9 minutes. It offers brew-strength control, programming, and a permanent coffee filter. With its performance and striking appearance, you might not mind having it out on the counter—especially in a kitchen with a stainless fridge and range. 
×