Some machines come with all the accessories you need to make espresso, but others don't. Check to see if your machine includes any accessories before you buy them. You will need a grinder to have freshly ground espresso, a milk frother or a milk frothing pitcher if you like foamy milk for cappuccinos or lattes, and a tamper to press down the coffee grounds before you make espresso. We explain why you need each one and recommend which ones to buy below:
We’re the largest online retailer of espresso machines and it’s no secret why. We love coffee. We love that first sip in the morning, the one that you’ve got to fight to get to your mouth because 8 hours of sleep seems like a pipe dream. We love that rush, when the caffeine kicks in and you know that you’ve got the day in the palm of your hand. We love the art – brewing, roasting, tasting – and the journey that each coffee drinker takes in search of their perfect joe. We’ve been sharing that love with the world since 1997 and we hope you’ll pull up a cup and join us! If this sounds like the place you would love to work, see our latest job openings on our Careers Page!
Prior to the introduction of pre-measured self-contained ground coffee filter rings, fresh coffee grounds were measured out in scoopfuls and placed into the metal percolator basket. This process enabled small amounts of coffee grounds to leak into the fresh coffee. Additionally, the process left wet grounds in the percolator basket, which were very tedious to clean. The benefit of the Max Pax coffee filter rings was two-fold: First, because the amount of coffee contained in the rings was pre-measured, it negated the need to measure each scoop and then place it in the metal percolator basket. Second, the filter paper was strong enough to hold all the coffee grounds within the sealed paper. After use, the coffee filter ring could be easily removed from the basket and discarded. This saved the consumer from the tedious task of cleaning out the remaining wet coffee grounds from the percolator basket.
At the beginning of the twentieth century, although some coffee makers tended to uniformity of design (particularly stovetop percolators), others displayed a wide variety of styling differences. In particular, the vacuum brewer, which required two fully separate chambers joined in an hourglass configuration, seemed to inspire industrial designers. Interest in new designs for the vacuum brewer revived during the American Arts & Crafts movement with the introduction of "Silex" brand coffee makers, based on models developed by Massachusetts housewives Ann Bridges and Mrs. Sutton. Their use of Pyrex solved the problem of fragility and breakability that had made this type of machine commercially unattractive. During the 1930s, simple, clean forms, increasingly of metal, attracted positive attention from industrial designers heavily influenced by the functionalist imperative of the Bauhaus and Streamline movements. It was at this time that Sunbeam's sleek Coffeemaster vacuum brewer appeared, styled by the famous industrial designer Alfonso Iannelli. The popularity of glass and Pyrex globes temporarily revived during the Second World War, since aluminum, chrome, and other metals used in traditional coffee makers became restricted in availability.
The well-designed Braun BrewSense came closer to the gold standard for water brewing temperature than almost any other drip coffee maker in our testing, and delivered a rich, bold and hot cup of coffee. It has settings to program the coffee to brew ahead of time and you can adjust the brew strength and the temperature of the warming plate. Also available in black.
Let’s circle back to that extra-long brew time. There are two factors that didn’t make it an automatic “no” for us. The first is that the OXO On 12-Cup is programmable. Like our experts say, grinding coffee in advance isn’t going to make the most perfect cup of coffee. But the fact that you can program the machine’s “wake-up time” to start brewing and have coffee ready when you are takes the sting out of the wait.
Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.
“We really love this machine because we love great coffee, but we don’t make frothy milk drinks. This machine produces very, very good coffee from scratch at the push of a button, automatically grinding the beans pumping through hot water, and dumping out the “puck” of coffee grounds into the internal bin. It’s a nice compact size, and fits easily on a counter under the cabinets.”
For many of us, the daily grind can't begin until we've had that first cup of piping hot coffee—so the right brewer is at the top of the list. The most basic coffee makers make at least a decent cup, but a little more money buys conveniences such as programmability, a thermal carafe to keep coffee hot longer, settings that let you adjust brew strength, and more.