Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.


Bunn-O-Matic came out with a different drip-brew machine. In this type of coffeemaker, the machine uses a holding tank or boiler pre-filled with water. When the machine is turned on, all of the water in the holding tank is brought to near boiling point (approximately 200–207 °F or 93–97 °C) using a thermostatically-controlled heating element. When water is poured into a top-mounted tray, it descends into a funnel and tube which delivers the cold water to the bottom of the boiler. The less-dense hot water in the boiler is displaced out of the tank and into a tube leading to the spray head, where it drips into a brew basket containing the ground coffee. The pourover, water displacement method of coffeemaking tends to produce brewed coffee at a much faster rate than standard drip designs. Its primary disadvantage is increased electricity consumption in order to preheat the water in the boiler. Additionally, the water displacement method is most efficient when used to brew coffee at the machine's maximum or near-maximum capacity, as typically found in restaurant or office usage. In 1963, Bunn introduced the first automatic coffee brewer, which connected to a waterline for an automatic water feed.

‡Pre-Infusing: Pre-infusing is a technique where the dry coffee grounds are initially saturated with hot water, allowing a “bloom” of carbon dioxide to escape. This 45-second(ish) process puts hot water into contact with more surface area around each ground throughout the brewing process, as it’s no longer competing with the escaping gas bubbles. It can improve the quality of the final product, since this more uniform contact creates a more even extraction. It’s a feature that six of the 10 pots we tested incorporated into their designs — as well as all four of our top picks.


“Last night was a perfect test of the single-cup concept. I had already programmed and prepped my 3 a.m. standard coffee brew, however, I still wanted a cup of coffee. I switched over to the single cup and brewed my cup, then switched back and pressed the program button to ensure it would still brew the main pot at 3 a.m. Worked like a charm!! Before, I would have had to brew the entire eight cups that were ready, toss out most of it, and set up my morning brew all over again.”

You are pre-ordering a product that has not yet been manufactured. If you order today, it will be scheduled for shipment in 6 months or more. We've described Spinn as accurately as we can, but we may need to make changes to the final product. (If that happens, we'll let you know.) We’ll process your payment immediately, but you can get a complete refund, including shipping, at any time before your Spinn is shipped. By ordering you also agree to our  Policy and Terms & Conditions.
So while yes, $150 (current price as I review this item) is a good chunk of change, I honestly believe it’s worth it. This is a high-quality machine that will hopefully last a very, very long time. The quality of the espresso is very good, and in the long run, it will save you the cost of espresso-based drinks at the coffee shop. It all evens out in the end! If you are considering buying this, my advice is to just do it. It’s worth it! Love love love!”
In later years, coffeemakers began to adopt more standardized forms commensurate with a large increase in the scale of production required to meet postwar consumer demand. Plastics and composite materials began to replace metal, particularly with the advent of newer electric drip coffeemakers in the 1970s. During the 1990s, consumer demand for more attractive appliances to complement expensive modern kitchens resulted in a new wave of redesigned coffeemakers in a wider range of available colors and styles.
There were lots of innovations from France in the late 18th century. With help from Jean-Baptiste de Belloy, the Archbishop of Paris, the idea that coffee should not be boiled gained acceptance. The first modern method for making coffee using a coffee filter—drip brewing—is more than 125 years old, and its design had changed little. The biggin, originating in France ca. 1780, was a two-level pot holding coffee in a cloth sock in an upper compartment into which water was poured, to drain through holes in the bottom of the compartment into the coffee pot below. Coffee was then dispensed from a spout on the side of the pot. The quality of the brewed coffee depended on the size of the grounds - too coarse and the coffee was weak; too fine and the water would not drip the filter. A major problem with this approach was that the taste of the cloth filter - whether cotton, burlap or an old sock - transferred to the taste of the coffee. Around the same time, a French inventor developed the "pumping percolator", in which boiling water in a bottom chamber forces itself up a tube and then trickles (percolates) through the ground coffee back into the bottom chamber. Among other French innovations, Count Rumford, an eccentric American scientist residing in Paris, developed a French Drip Pot with an insulating water jacket to keep the coffee hot. Also, the first metal filter was developed and patented by French inventor.
That said, it’s not as elegant to use as the OXO machines. (Nor is it as nice to look at. One tester described its tall, bulbous body and squat carafe as “UFO-like.”) Take its eight-button controls, for example, which you use to toggle among brew modes, scroll up and down within the menu, and engage a manual brewing feature. Programming it to start brewing at a certain time was about as intuitive as setting an alarm on a clock radio — easy enough, but more technical than sleek. OXO definitely feels like the future; Behmor is more, “If it ain’t broke, why fix it?”
Although it's very easy to use — you just fill the portafilter with grounds, attach it to the machine, and press the button to start — The Gaggia Classic isn't as flexible or intuitive as the Breville Barista Express. The user manual is less detailed, too, so you have to have a basic idea of what you're doing or browse the internet for tips. The machine has a one-year warranty if you run into problems.

Reviews.com has an advertising relationship with some of the offers included on this page. However, the rankings and listings of our reviews, tools and all other content are based on objective analysis. For more information, please check out our full Advertiser Disclosure. Reviews.com strives to keep its information accurate and up to date. The information in our reviews could be different from what you find when visiting a financial institution, service provider or a specific product’s website. All products are presented without warranty.
Feature-filled and powerful, the K475 Single-Serve K-Cup Pod Coffee Maker features customizable settings including strength and temperature control to deliver a truly premium brewing experience. Brew five different cup sizes – from 4 to 12 oz. with K-Cup(R) pods – plus the ability to brew a mug or carafe, the product brews a perfectly sized beverage for any occasion. Brewing your favorite beverage is easy thanks to the large color touchscreen, complete with separate settings for specialty...
“This little espresso maker is just awesome! It is fun to use and always makes a great cup of espresso. I’ve used it to make macchiatos, affogatos, and as a espresso shot to my coffee. The simplicity of this stovetop espresso maker is amazing. You won’t get as much crema as you would with an espresso machine but the aroma and taste are unmatched. I’ve had the three-cup model for a few months now, and I use it often. I’ve had no problems with it at all. After it use I just rinse it with warm water and let it air dry.”
Only two optional settings are available: You can control the heating element under the carafe and turn down the temperature if desired. Other than that, the Moccamaster doesn't have—and doesn't need—anything else. Technivorm boasts that its heating element can get water between 196ºF and 205ºF, which specialists say is the ideal temperature for brewing coffee.
CR’s take: If you’re an aficionado of fresh ground coffee, this Black+Decker is the brewer to buy. As the name suggests, the Mill & Brew goes that extra mile, grinding whole coffee beans just before brewing. As a result, the machine is capable of making a great pot of coffee. Made of plastic with stainless steel accents, this model is easy to use and to clean, earning a Very Good rating in our convenience tests. It allows you to adjust brew strength, and it’s programmable, so you can set it to grind and brew just before you wake up.
×