CR’s take: If you like the look of black stainless steel, you can add a hit of the trendy finish to your kitchen with the Bella Ultimate Elite Collection coffee maker. Appearance aside, this model brews a fresh pot in just 9 minutes and is graceful in action, earning strong ratings in our carafe handling tests. It offers programming, brew-strength control, a pause-and-serve feature, and auto-shutoff. Bella drip machines also received a Very Good rating for predicted reliability. At about $50, this affordable, attractive option won’t disappoint.
The well-designed Braun BrewSense came closer to the gold standard for water brewing temperature than almost any other drip coffee maker in our testing, and delivered a rich, bold and hot cup of coffee. It has settings to program the coffee to brew ahead of time and you can adjust the brew strength and the temperature of the warming plate. Also available in black.
A drip coffee system is far superior to an instant coffee maker. For some, the smoother, less intense taste and aroma of a drip coffee system is a lot more palatable than the bitter coffee that tends to be produced by a French press. Not only that, but a drip coffee system is versatile – you can ground up your coffee beans to use in your system, and you can also buy premade blends.
There were lots of innovations from France in the late 18th century. With help from Jean-Baptiste de Belloy, the Archbishop of Paris, the idea that coffee should not be boiled gained acceptance. The first modern method for making coffee using a coffee filter—drip brewing—is more than 125 years old, and its design had changed little. The biggin, originating in France ca. 1780, was a two-level pot holding coffee in a cloth sock in an upper compartment into which water was poured, to drain through holes in the bottom of the compartment into the coffee pot below. Coffee was then dispensed from a spout on the side of the pot. The quality of the brewed coffee depended on the size of the grounds - too coarse and the coffee was weak; too fine and the water would not drip the filter. A major problem with this approach was that the taste of the cloth filter - whether cotton, burlap or an old sock - transferred to the taste of the coffee. Around the same time, a French inventor developed the "pumping percolator", in which boiling water in a bottom chamber forces itself up a tube and then trickles (percolates) through the ground coffee back into the bottom chamber. Among other French innovations, Count Rumford, an eccentric American scientist residing in Paris, developed a French Drip Pot with an insulating water jacket to keep the coffee hot. Also, the first metal filter was developed and patented by French inventor.
This grinder produced the most even grounds out of all the machines I tested, and its range of output is all-encompassing. The coarsest setting produces large flakes, while the finest setting produces puffy grounds akin to powdered sugar—perfect for Turkish coffee. In between, I was quickly able to find the ideal settings for my Hario Woodneck, Aeropress, and even mason jar cold brew.
Breville Oracle Espresso Maker. Maintains temperature to within 1.35 degrees of optimum brewing temperature during extraction for fullest flavor. Model #BES980XL. Separate air pump allows for customized milk frothing: select latte or cappuccino and the machine automatically adjusts the amount of froth, while a sensor detects when milk has reached the ideal temperature.
CR’s take: If you need only one or two cups of coffee each morning and you don’t want a pod coffee maker, consider the Technivorm Moccamaster Cup-One Brewer. Compact and clean-lined, it has a profile that makes some sense of its high price (it retails for more than $200), and it’s a superstar when it comes to reliability. Technivorm was one of only three drip machine brands to earn an Excellent rating for predicted reliability in our member survey. Our testers also give this machine a strong score for brew performance. This model has only one simple feature (auto-shutoff) and it’s not the easiest machine to use, but you can count on it to last.
Only two optional settings are available: You can control the heating element under the carafe and turn down the temperature if desired. Other than that, the Moccamaster doesn't have—and doesn't need—anything else. Technivorm boasts that its heating element can get water between 196ºF and 205ºF, which specialists say is the ideal temperature for brewing coffee.
An electric drip coffee maker can also be referred to as a dripolator. It normally works by admitting water from a cold water reservoir into a flexible hose in the base of the reservoir leading directly to a thin metal tube or heating chamber (usually, of aluminum), where a heating element surrounding the metal tube heats the water. The heated water moves through the machine using the thermosiphon principle. Thermally-induced pressure and the siphoning effect move the heated water through an insulated rubber or vinyl riser hose, into a spray head, and onto the ground coffee, which is contained in a brew basket mounted below the spray head. The coffee passes through a filter and drips down into the carafe. A one-way valve in the tubing prevents water from siphoning back into the reservoir. A thermostat attached to the heating element turns off the heating element as needed to prevent overheating the water in the metal tube (overheating would produce only steam in the supply hose), then turns back on when the water cools below a certain threshold. For a standard 10-12 cup drip coffeemaker, using a more powerful thermostatically-controlled heating element (in terms of wattage produced), can heat increased amounts of water more quickly using larger heating chambers, generally producing higher average water temperatures at the spray head over the entire brewing cycle. This process can be further improved by changing the aluminum construction of most heating chambers to a metal with superior heat transfer qualities, such as copper.
Domestic electrification simplified the operation of percolators by providing for a self-contained, electrically powered heating element that removed the need to use a stovetop burner. A critical element in the success of the electric coffee maker was the creation of safe and secure fuses and heating elements. In an article in House Furnishing Review, May 1915, Lewis Stephenson of Landers, Frary and Clark described a modular safety plug being used in his company's Universal appliances, and the advent of numerous patents and innovations in temperature control and circuit breakers provided for the success of many new percolator and vacuum models. While early percolators had utilized all-glass construction (prized for maintaining purity of flavor), most percolators made from the 1930s were constructed of metal, especially aluminum and nickel-plated copper.
The next is the machine’s auto-pause. If you remove the carafe before your full pot is done brewing, the flow will stop until the carafe goes back in. It’s not a perfect system. There are a few inevitable drips that add an extra step to clean-up, and if the water is held up in the brew basket for too long, it increases the chance of over-extraction. But if you want a great first cup to sip on while the rest of your pot is brewing, you’ll get it in a much more satisfying time frame.
The OXO On 12-Cup feels high-tech without being high maintenance. It’s beautifully constructed, with silicone gaskets, a stainless steel carafe, and sturdy-feeling plastic. But let’s go ahead and get its biggest downside right out there in the open. Of the 10 machines we tested, it took the longest to brew eight cups of coffee — nearly 15 minutes. It heats its entire reservoir of water to temperature before a drop touches the grounds, and if you’re jonesing for a full pot to start off your day, that wait is going to feel like a lifetime. This was particularly noticeable considering four of the machines we tested brewed the same amount of coffee in less than half that time. The Bunn BTX-B Velocity Brew could do it in three minutes flat.
All the machines we tested came with either insulated carafes or glass pots with built-in warmers. Both have pros and cons. Glass pots are typically easier to clean because they tend to have wider mouths, and the lack of internal insulation means that glass pots will have a greater interior volume relative to its exterior volume — basically, it’s easier to get your hand or dish sponge into a glass pot. On the other hand, glass pots are more fragile and have to be heated from a base plate. In our tests, those base plates could even raise the temperature of the coffee, like with the CuisinArt, which can make coffee taste burnt.
CR’s take: Though this Bialetti lacks typical drip-machine features such as programming and brew-strength control, it more than compensates with a Very Good rating in our brew performance test and a crisp 8-minute brew time. If you’re the type who sometimes prefers a morning shot of espresso to a cup of joe, this twofer—drip machine beside espresso maker—may be for you. It features a built-in milk frother, a permanent coffee filter, and auto-shutoff. CR does not yet have enough survey data on Bialetti machines to rate them on reliability and satisfaction, but when we do, we’ll add that info to our ratings.