‡Pre-Infusing: Pre-infusing is a technique where the dry coffee grounds are initially saturated with hot water, allowing a “bloom” of carbon dioxide to escape. This 45-second(ish) process puts hot water into contact with more surface area around each ground throughout the brewing process, as it’s no longer competing with the escaping gas bubbles. It can improve the quality of the final product, since this more uniform contact creates a more even extraction. It’s a feature that six of the 10 pots we tested incorporated into their designs — as well as all four of our top picks.
“What I REALLY like about it is that it’s pretty much an all-in-one system without the thousand-dollar-plus all-in-one cost. I push one button and all the magic happens, and it’s quite entertaining to watch the espresso cascade through the milk and create separate layers. I also like that I can take the milk and store it in my fridge. I’ve done some temperature tests, and only noticed a five-degree increase after making a double latte, before I put it back in the fridge. This is nice, as you would think that to be so close to all that heat, it would be a much bigger temperature fluctuation.”
The moka pot is most commonly used in Europe and in Latin America. It has become an iconic design, displayed in modern industrial art and design museums such as the Wolfsonian- FIU, Museum of Modern Art, the Cooper–Hewitt, National Design Museum, the Design Museum, and the London Science Museum. Moka pots come in different sizes, from one to eighteen 50 ml cups. The original design and many current models are made from aluminium with bakelite handles.
The best coffeehouse in town is on your countertop with the Ninja Coffee Bar™ brewer. Ninja’s patent-pending brewing technology is designed to deliver better, richer- tasting coffee with variable richness levels that are never bitter. Only the Ninja Coffee Bar brewer has Thermal Flavor Extraction, which truly unlocks the full flavor potential of your coffee. Only Ninja® Auto-iQ™ One-Touch Intelligence allows you to CHOOSE A SIZE, CHOOSE A BREW. Auto-iQ™ One Touch Intelligence draws...
The principle of a vacuum brewer was to heat water in a lower vessel until expansion forced the contents through a narrow tube into an upper vessel containing ground coffee. When the lower vessel was empty and sufficient brewing time had elapsed, the heat was removed and the resulting vacuum would draw the brewed coffee back through a strainer into the lower chamber, from which it could be decanted. The Bauhaus interpretation of this device can be seen in Gerhard Marcks' Sintrax coffee maker of 1925.
Drip-style coffee makers already have a bit of a flavor handicap when compared with other brewing methods, like pour-over and French press, which give coffee drinkers ultimate control over every aspect of the brewing (and therefore extraction) process. This makes it even more important to select a high-quality coffee bean for your at-home drip coffee maker. To learn more, we spoke with Saadat Awan at Woodcat Coffee in Los Angeles.
The OXO is SCAA-certified, so we knew going in that it would heat water to the right temperature range and let coffee brew for the right amount of time. But what really sold us on the OXO was how its scrolling dial made even that customizable. Assuming you want to bring the extraction down a touch for lighter, subtler coffee, you can lower the water temperature with a twist of the dial. Likewise, if you want a slightly more robust aroma from your brew, you can increase the water’s temp the same way.
The Mr. Coffee Optimal Brew coffee maker System has a highly modular design, with its rectangular water reservoir easily sliding in and out of the chassis. For those who only want a cup of basic coffee, you will find that the Mr. Coffee Optimal Brew coffee maker System will do that very well – its "brew now" button is found on the front of the machine.
A cafetiere (Coffee Plunger, French press in US English) requires coffee of a coarser grind than does a drip brew coffee filter, as finer grounds will seep through the press filter and into the coffee. Coffee is brewed by placing the coffee and water together, stirring it and leaving to brew for a few minutes, then pressing the plunger to trap the coffee grounds at the bottom of the beaker.
Prior to the introduction of pre-measured self-contained ground coffee filter rings, fresh coffee grounds were measured out in scoopfuls and placed into the metal percolator basket. This process enabled small amounts of coffee grounds to leak into the fresh coffee. Additionally, the process left wet grounds in the percolator basket, which were very tedious to clean. The benefit of the Max Pax coffee filter rings was two-fold: First, because the amount of coffee contained in the rings was pre-measured, it negated the need to measure each scoop and then place it in the metal percolator basket. Second, the filter paper was strong enough to hold all the coffee grounds within the sealed paper. After use, the coffee filter ring could be easily removed from the basket and discarded. This saved the consumer from the tedious task of cleaning out the remaining wet coffee grounds from the percolator basket.
At the beginning of the twentieth century, although some coffee makers tended to uniformity of design (particularly stovetop percolators), others displayed a wide variety of styling differences. In particular, the vacuum brewer, which required two fully separate chambers joined in an hourglass configuration, seemed to inspire industrial designers. Interest in new designs for the vacuum brewer revived during the American Arts & Crafts movement with the introduction of "Silex" brand coffee makers, based on models developed by Massachusetts housewives Ann Bridges and Mrs. Sutton. Their use of Pyrex solved the problem of fragility and breakability that had made this type of machine commercially unattractive. During the 1930s, simple, clean forms, increasingly of metal, attracted positive attention from industrial designers heavily influenced by the functionalist imperative of the Bauhaus and Streamline movements. It was at this time that Sunbeam's sleek Coffeemaster vacuum brewer appeared, styled by the famous industrial designer Alfonso Iannelli. The popularity of glass and Pyrex globes temporarily revived during the Second World War, since aluminum, chrome, and other metals used in traditional coffee makers became restricted in availability.
The illy name is most often associated with their coffee, but they also make capsule-style machines for convenient home brewing. This model takes less space than the similar Y3 model, but still has features that coffee lovers look for. It brews standard drip coffee, and it makes espresso with 19 bars of pressure. No matter what you’re brewing, you can choose your brew strength, water temperature, and cup size, for the perfect cup every time.
CR’s take: If you’re an aficionado of fresh ground coffee, this Black+Decker is the brewer to buy. As the name suggests, the Mill & Brew goes that extra mile, grinding whole coffee beans just before brewing. As a result, the machine is capable of making a great pot of coffee. Made of plastic with stainless steel accents, this model is easy to use and to clean, earning a Very Good rating in our convenience tests. It allows you to adjust brew strength, and it’s programmable, so you can set it to grind and brew just before you wake up.